Svetskommissionen är en teknisk branschorganisation för fogande industri. Vi jobbar med standardisering, forskning och utbildning. Svetskommissionens viktigaste uppgift är att verka för våra medlemmars intressen.
- Start
- › FoU
- › Fogningscentrum CJS
- › Rapporter från CJS
Forskningsrapporter
Beställ CJS-rapport
Nedan finns en lista över titlarna till de publicerade rapporter från CJS som är öppna för Svetskommissionens medlemmar. För att beställa en rapport i sin helhet, kontakta Svetskommissionens kansli: Marie Allvar Kärrbrant.
Garant- och stödjande medlemmar har rätt till en fri kopia av respektive rapport som skickas direkt till företaget. Kontakta din företagsrepresentant i Svetskommissionen.
För Svetskommissionens, Jernkontorets och Swerims medlemmar är rapporterna vanligtvis tillgängliga 12 månader efter publicering, för övriga 18 månader efter publicering. "Begränsad" i tabellen nedan innebär att rapporten är tillgänglig för Svetskommissionens medlemmar men inte för allmänheten.
| Nr | Publiceringsdatum | Öppn. datum | Rapporttitel |
|---|---|---|---|
Swerim-2023-305 | 2023-06-28 | Projection Nut Welding to High and | |
Swerim-2023-227 | 2023-05-23 | 2024-11-22 | Repair Welding I - Pore formation |
Swerim-2023-161 | 2023-03-10 | Begränsad | New high-productive welding |
Swerim-2023-159 | 2023-02-28 | Improving fatigue properties in laser | |
Welding in the world Volume 67, pages 805–817, (2023) | 2022-12-20 | Öppen | Ferrite fraction in duplex stainless steel welded with a novel plasma |
Swerim-2022-380 | 2022-11-08 | 2024-05-08 | Mixed Material Joining - |
Swerim-2022-348 | 2022-10-17 | 2024-04-07 | Plasma Welding II |
| Swerim-2022-335 | 2022-10-05 | Begränsad | Techniques and adaptive systems |
Swerim-2022-317 | 2022-04-30 | Begränsad | Shunt distance for Resistance Spot |
Swerim-2022-147 | 2022-03-24 | 2023-09-24 | Laser and Laser-MAG Hybrid |
Swerim-2022-109 | 2022-01-12 | 2023-07-12 | Autogenous laser welding of duplex stainless steels |
Swerim-2022-159 | 2022 | Begränsad | LUS for non-destructive testing of |
101220 | 2021-06-18 | Begränsad | Undercut Welding |
MFS | 2021-05-20 | Begränsad | Continuous welds in aluminium |
Swerim-2021-155 | 2021-12-17 | 2023-06-17 | Laser Screw Welding |
MEF20164 | 2021-02 | Begränsad | Welding of Zn coated boron steels |
14848 | 2021-07-01 | Begränsad | High productivity MAG welding II |
14853 | 2021-06-09 | 2022-06-09 | FATIMU I-III: Fatigue strength |
101894 | 2022-02-25 | Begränsad | Deformations after welding - simulations |
12834 | 2021-03 | Begränsad | Cold welding methods using weaving technique in butt and overlay welding – High alloyed stainless steel |
MEF20162 | 2021-02-01 | Begränsad | CleanWeld |
101226 | 2019-05-17 | Begränsad | Joining of ductile iron to low alloy steel |
MEF20117 | 2020-03-20 | 2022-06-01 | Decreasing deformations in welds in HSS by LTT |
MEF20145 | 2020-11 | 2022-11 | Spot welding of hot formed material II |
MEF20140 | 2020-03 | 2021-09 | LUS as NDT-method for spot welds |
MEF 20143 | 2020-02 | 2022-02 | Laser welding without filler material |
MEF 20144 | 2020-11-03 | Begränsad | Laser welding of high alloyed austenitic stainless steels |
MEF20115 | 2020-03 | 2021-09 | K-TIG for avoidance of multi-pass welding |
MED20114 | 2019-11 | Begränsad | RSW of high strength stainless steel to Zn-coated carbon steel |
101221 | 2019-08 | Öppen | Pitting Corrosion Evaluation of Post-Weld Cleaning Methods for Stainless Steel Welds |
MEF18139 | 2019-04 | Öppen | Guideline - How to measure current, voltage and arc power in arc welding |
MEF19114 | 2016 | Begränsad | High productivity MAG-welding |
MEF18109 | 2018-11-01 | 2020-05-01 | Avoidance of solidification cracking in high restraint weldments |
KIMAB-2018-159 | 2018-08 | 2020-02-28 | Evaluation of adaptive systems for resistance spot welding of thin sheet aluminium |
KIMAB-2018-158 | 2019-08 | Begränsad | Spot welding of hot formed material |
KIMAB-2018-155 | 2018-11-01 | 2020-05-05 | FATscat - Understand the scatter in fatigue life of welded specimens |
KIMAB-2018-138 | 2018-05-23 | Begränsad | Reaching higher quality and fatigue strength by adjustments of the welding process |
KIMAB-2018-166 | 2018-09 | 2019-02 | Braze welding of highly alloyed stainless steel |
KIMAB-2017-162 | 2017-12 | 2019-06-06 | Mixed material (hardened boron steel + aluminium) joining |
KIMAB-2017-128 | 2017-04-11 | 2018-10-11 | Weldability of Aluminium Alloys for |
KIMAB -2017-116 | 2017-03-27 | Begränsad | Influence of Base material surface condition on fatigue performance of MAG welds |
KIMAB 2017-155 | 2017-09 | 2019-05-01 | Gas Metal Arc Welding: fatigue life improvement through controlled undercuts and weld toe radius |
KIMAB-2017-602 | 2017-09-20 | 2019-04 | NDT of multi-material joints |
KIMAB-2016-152 | 2016-10 | Begränsad | MAG process parameters influencing weld geometry related to fatigue properties - |
KIMAB-2016-150 | 2016-09-01 | Begränsad | Weldability of 1900MPa Boron steels |
KIMAB-2016-145 | 2016-09-06 | Öppen | Stress relaxation of welds - A literature survey |
KIMAB 2016-144 | 2016-09-06 | Öppen | Stress relaxation of residual stresses |
KIMAB-2016-143 | 2016-09-06 | 2018-09 | Effect of single overloads on |
KIMAB-2016-142 | 2016-06 | 2016-09 | Effect of overloads in variable amplitude loading on HFMI treated welded joints |
KIMAB-2016-141 | 2016-11 | Öppen | Submerged arc welding of high |
KIMAB-2016-137 | 2016-07-08 | 2018-01 | Fatigue root cracks in MAG fillet welds |
KIMAB-2016-133 | 2016-06 | Begränsad | Properties of extremely short welded |
KIMAB-2016-124 | 2016-06-01 | 2017-12-01 | DYNAMECH - Mechanical joint |
KIMAB-2016-113 | 2015-06-01 | Begränsad | Minimize weld deformation in 8-20mm |
2016-112 | 2016-03 | 2017-09 | Resistance Spot Welding of 22MnB5 |
KIMAB-2016-111 | 2014-12 | 2016-03 | Hot cracking mechanisms in welds in Ni-base alloys |
KIMAB-2015-509 | 2015-04 | 2016-10 | Influence of silicon on weld geometry |
KIMAB-2015-507 | 2016-07 | 2017-12 | Welding duplex stainless steels to carbon steel or to austenitic stainless steel |
KIMAB-2015-506 | 2015-03-23 | 2016-06-23 | |
2014-534 | 2014-12-01 | 2015-12-17 | Fatigue testing of mechanical joints |
2014-517 | 2014-06-01 | 2015-06-12 | Possibilities with new welding methods |
2014-501 | 2014-01-23 | 2015-07-01 | Cold MIG welding of duplex stainless steels |
2014-110 | 2012-09-01 | Öppen | Non destructive evaluation of adhesive bonds |
2013-564 | 2014-01-31 | 2015-01-31 | Pore formation in MIG welding duplex stainless steels with a solid super duplex filler wire |
2013-530 | 2013-09-01 | Öppen | Methods for avoidance of spatter in MIG/MAG welding in the short circuiting mode |
2013-529 | 2014-08-26 | Öppen | Joinability for new surface coatings |
2013-519 | 2014-04-24 | Öppen | Possibilities with new MAG processes |
2013-133 | 2013-12-03 | Öppen | Optimering av brottmekanisk provstav för sega material |
2012-550 | 2014-01-01 | Öppen | High speed and good penetration MIG/MAG welding |
2012-546 | 2014-06-30 | Öppen | Developing specimens with cold-laps |
2012-538 | 2013-01-01 | 2014-06-30 | Plasma spot welding |
2012-537 | 2013-01-01 | 2014-06-30 | MAG process parameters influencing weld geometry related to fatigue properties – part1 (FATMAG-1) |
2012-530 | 2012-12-05 | 2013-12-05 | Aluminium joining for automotive applications |
2012-526 | 2012-06-01 | 2013-12-01 | Weldability of Mn + N alloyed austenitic stainless steels |
2012-525 | 2012-01-01 | 2013-06-01 | Weldability of hardenable steels with high carbon content |
2012-523 | 2012-08-30 | 2013-08-30 | Joining of thin strips |
2012-522 | 2012-06-07 | 2013-06-07 | Challenges using mixed materials, Al-Fe |
2011-560 | 2012-01-31 | 2014-01-31 | Resistance seam welding: Part 2 – Project summary |
2011-557 | 2012-04-30 | 2013-11-01 | Optimised MIG/MAG welding of high –alloyed stainless steels with Ni-base filler metals |
2011-556 | 2012-05-30 | 2013-11-30 | Start and stop in MIG/MAG welding |
2011-554 | 2012-01-20 | 2013-02-20 | Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 2 |
2011-550 | 2012-02-21 | 2013-08-21 | Optimised MIG/MAG weldingof 3-6mm sheet materials |
2011-546 | 2011-11-01 | 2013-05-01 | Resistance seam welding of UHSS |
2011-517 | 2014-04-30 | Öppen | Methods for mechanized NDT evaluation of weldments |
2011-501 | 2011-01-31 | 2012-01-31 | Drawn arc stud welding of brackets & nuts on thin steel sheet |
2010-546 | 2011-02-23 | 2012-02-23 | New variants of TIG processes for high productivity and improved penetration |
2010-544 | 2011-03-01 | 2012-03-01 | Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 1 |
2010-539 | 2015-08-25 | Quality assurance of brazed joints | |
2010-538 | 2011-02-28 | 2012-01-01 | Single Sided Joining Methods - A Feasability Study |
2010-528 | 2011-05-22 | 2012-11-22 | Fatigue Properties of MAG welded plug joints in hot rolled sheet steel |
2010-519 | Öppen | Recent developments in laser welding & cutting, a literature review | |
2010-512 | 2010-02-19 | 2011-06-30 | Fatigue properties of resistance spot welded and MAG plug welded joints - a comparison study |
2010-510 | 2010-01-01 | 2011-01-01 | Joining of dissimilar metals using MIG weld brazing and friction stir welding |
2010-503 | 2009-10-01 | Öppen | Visual joins for automotive applications – Weld-brazing with CMT and Plasmatron of galvanized steel without spatter |
2010-120 | Öppen | Investigation of possibility to use spectrometry for monitoring the plasma in gas shielded arc welding | |
2010-116 | Öppen | Influence of microfissures in submerged arc welds in high alloyed stainless steel - Part II | |
2010-114 | Öppen | Crash Testing - Measurement Control | |
2010-113 | Öppen | Optimization of Weld Nut Geometry by Simulation | |
2010-111 | Öppen | Increased weldability and productivity using hybrid Friction Stir Welding (FSW) | |
2010-106 | Öppen | Metaller – en kort sammanställning | |
2010-103 | Öppen | Svets- och mekaniska fogar för multimaterial konstruktioner | |
2009-534 | 2009-05-18 | 2010-00-08 | Improved properties for resistance spot welding applications |
2009-526 | 2009-06-01 | 2012-06-01 | Plasma Welding and Brazing, opens 2012-06-01 |
2009-521 | 2009-04-24 | 2010-04-24 | Joining and properties of mixtures of materials |
2009-130 | 2010-01-12 | Öppen | Replacement methods for conventional MIG/MAG welding |
2009-128 | Öppen | Handling fatigue evaluationsof start and stop regions of acontinuous weld in a FEenvironment | |
2009-103 | Öppen | New techniques to handle fatigue calculations of continuous welds in a FE-environments based on shell elements | |
2009-101 | Öppen | FE-modelling of fatigue strength of laser welds | |
2008-548 | 2009-01-30 | 2011-03-31 | Fatigue Properties of LaserHybrid Welds of DP600 andBoron Steel Sheets,Compared to MAG Welds |
2008-547 | 2008-10-16 | 2011-03-31 | High Speed and Static Testing of Weld Nuts on Carbon and Boron Sheet Steels |
2008-524 | 2008-04-23 | 2011-01-01 | Fatigue properties of weld-bonded joints out of Dogal 600 DP – high strength rubber based adhesives compared to one epoxi based adhesive |
2008-507 | Öppen | Methods to perform larger throat thicknesses in standing fillet position (PB) with high productivity - A pre-study | |
2008-117 | 2008-06-04 | 2010-12-31 | Literature survey: Plasma welding and brazing |
2008-115 | Öppen | Possibilities with laser illuminated high speed filming ( Only as powerpoint, movies on CD ) | |
2008-114 | Öppen | Optimal Joint Preparation for Laser Hybrid and Tandem MIG/MAG Welding | |
2008-105 | Öppen | Influence of micro fissuresin submerged arc welds inhigh alloyed stainless steel | |
2007-551 | 2007-06-12 | 2009-12-12 | Laser twin-spot technology in the welding of thin sheet C-Mn steel lap joints with thick zinc coating and uncoated butt joints |
2007-550 | 2007-06-20 | 2009-12-20 | Investigation of weldability with new MIG/MAG processes |
2007-548 | Öppen | Laser sources for welding and cutting applications | |
2007-531 | 2008-01-18 | 2010-12-31 | Fatigue performance of laser and MIG-brazed joints of zinc coated steel sheets |
2007-525 | 2007-06-01 | 2009-06-30 | Crash testing of laser weld and adhesive bonded joints of low- and ultra high strength steels and aluminium alloys – experimental tests and analysis |
2007-524 | 2007-06-01 | 2009-06-30 | Crash testing of laser weld and adhesive bonded joints of low- and ultra high strength steels and aluminium alloys – experimental tests |
2007-512 | 2007-03-01 | 2008-03-01 | Optimizing tandem MIG/MAG and Laser Hybrid Welding |
2007-503 | 2007-09-30 | 2008-12-31 | A study on welding performance with Laser-MIG/MAG welding for aluminium, stainless steel, coated boron steel and mixed materials |
2007-502 | 2007-05-01 | 2009-03-31 | Fatigue and crash strength of spot welded HSS and UHSS with reduced cooling time to reduce manufacturing cost |
2007-130 | Öppen | Applikationer för laserbelyst höghastighetsfilmning | |
2007-125 | Öppen | FEA study of the fatigue strength of brazed joints | |
2007-113 | Öppen | Spot welds in peel, shear and torsion, a literature study | |
2007-112 | Öppen | Evaluation of process engineering design for spot welds loaded in peel, shear and torsion | |
2007-104 | 2007-03-01 | 2009-03-31 | Static strength of weld nuts on carbon and boron sheets steels |
2006-543 | 2006-12-26 | 2008-06-26 | Process optimisation of Resistance spot welding of UHS steels |
2006-536 | 2006-10-25 | 2009-09-26 | Prediction of Durability of Adhesively Bonded Aluminium Joints for Automotive Applications – Final Report |
2006-523 | 2006-04-19 | 2007-10-19 | MIG/MAG-brazing of thin steel sheets |
2006-513 | 2006-02-28 | 2007-08-31 | Resistance Nut Welding of High Strength Steel |
2006-110 | Utveckling av produktionsteknik för sammansättning av tunnväggiga strukturer – Slutrapport till Swerea | ||
2006-102 | Self-piercing riveting and collar joining of polymers to metal sheet | ||
2005-540 | 2005-10-31 | Frictions Stir Spot Welding (FSSW) of C-Mn thin steel - A feasability study | |
2005-539 | 2005-10-31 | Frictions Stir Spot Welding (FSSW) of 6063 and 5754 Al-alloys | |
2005-532 | 2005-08-31 | Image systems for arc welding - technical requirements | |
2005-517 | 2006-02-28 | Possibilities with AdvancedControl of the ResistanceSpot Welding Process | |
2005-513 | 2005-03-31 | Methods for industrial joining of aluminium(AA5052) to coated C-Mnsteel (Dogal 220 RP) andstainless steel (LDX 2101) –a feasibility study | |
2005-512 | 2005-03-31 | Nd:YAG Laser-MIG/MAG hybrid welding. A process optimisation for coated CMn high strength steel, and a parameter investigation of C-Mn high strength steel, stainless steel and aluminium alloys | |
2005-127 | Tandem-MIG/MAG welding, experiences from optimisation of the process - part 2 | ||
2004-528 | Lack of fusion (LOF) in inclined downhill MAG welding – a study of the phenomenon and practical recommendations in order to avoid LOF | ||
2004-106 | MIG/MAG brazing of zinc coated and stainless steel sheet | ||
2003-569 | Stängd | Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets | |
2003-574 | Nya applikationer för FSW i aluminium: tailored blanks och punktsvetsning | ||
2003-567 | Enhanced prospects for Tandem MIG/MAG welding Optimisation of the process – Part 1 | ||
2003-519 | 2003-08-01 | Improved formability of laser welded tailored blanks in TRIP steels, C-Mn steels, stainless steels and aluminium alloys | |
2003-109 | Properties of MIG/MAG brazed joints in zinc coated steel sheets. | ||
2003-504 | Properties of FSW-joints in diffrent aluminium alloys | ||
IM-2002-567 | 2003-03-31 | 2004-09-30 | The Influence of Welding Parameters on Weld Quality and Tensile Strength of Aluminium Alloys AA6063 and AA5052 |
IM-2002-561:2 | 2003-02-28 | 2004-08-30 | Resistance spot welding of ultra high strength C-Mn and stainless steels – enclosures |
IM-2002-561:1 | 2003-02-28 | 2004-06-30 | Resistance spot welding of ultra high strength C-Mn and stainless steels |
IM-2002-552 | 2002-10-23 | 2004-04-23 | Arc and laser brazing of steel sheets - a literature study |
IM-2002-522 | 2002-04-29 | 2003-10-29 | Aspects on problems with lack of fusion in MIG/MAG welding |
IM-2002-502 | 2002-03-01 | 2003-09-01 | Laser weldability and tailored blanks welding of DP carbon steels, TRIP steel and austenitic stainless steels |
IM-2001-541 | 2001-12-31 | 2003-06-30 | On MAG-welding of Zn-coated steel: a project summary |
IM-2001-514 | 2001-12-31 | 2003-06-30 | Resistance spot welding of some EHS and UHS steels: Part 2, stainless steels and mixed materials |
IM-2001-513 | 2001-12-31 | 2003-06-30 | Resistance spot welding of some EHS and UHS steels: Part 1, C-Mn steels |
IM-2001-507 | 2002-03-30 | 2003-09-30 | Tandem wire MAG welding, a process study |
IM-2001-506 | 2001-03-30 | 2002-09-30 | MAG-welding of Zn-coated steel, a process study |
IM-2001-503 | 2001-01-31 | 2002-07-31 | Friction Stir Welding (FSW) of overlap joints in aluminium |
IM-2001-502 | 2001-01-23 | 2002-07-23 | Lack of fusion in MIG/MAG-welding of pressure vessels – a process study |
IM-2001-501 | 2001-01-11 | 2002-07-11 | Laser weldability of DP carbon steels, austenitic stainless steels and aluminium |
IM-2001-046 | Öppen | MAG-welding of Zn-coated steel, a continued process study | |
IM-2001-041 | Öppen | Magnetic Pulse Welding - A Literature Study | |
IM-2001-040 | Öppen | Influence of weld metal flowability on the welding result | |
IM-2001-013 | Öppen | MAG-welding of Zn-coated steel, a survey of problems and possibilities | |
IM-2000-549 | 2003-09-30 | Tandem wire MAG welding of C-Mn Steels | |
IM-2000-526 | 2001-11-01 | Friction Stir Welding (FSW) – En studie över möjligheter och begränsningar | |
IM-2000-515 | 2001-10-01 | Punktsvetsning av höghållfasta stål – en litteraturstudie | |
IM-2000-064 | Öppen | A guideline to high power(>3 kW) laser welding of steel, stainless steel and aluminium | |
IM-2000-007 | Öppen | Vägledning till godkända svetsförband |
Senast ändrad av:
Marie Allvar Kärrbrant