Svetskommissionen är en teknisk branschorganisation för fogande industri. Vi jobbar med standardisering, forskning och utbildning. Svetskommissionens viktigaste uppgift är att verka för våra medlemmars intressen.
- Medlemslogin
- / Press
- / A-Ö
- / In English
- Start
- Kunskapsbanken
- Utbildning
- Kurser
- Medlem
- Aktiviteter
- FoU
-
Fogningscentrum CJS
-
Rapporter från CJS
- A guideline to high power (>3 kW) laser welding of steel, stainless steel and aluminium 2000-064
- Aluminium joining for automotive applications
- Applikationer för laserbelyst höghastighetsfilmning
- Arc and laser brazing of steel sheets - a literature study
- Aspects on problems with lack of fusion in MIG/MAG welding
- A study on welding performance with Laser-MIG/MAG welding for aluminium, stainless steel, coated boron steel and mixed materials
- Cold MIG welding of duplex stainless steels
- Crash Testing - Measurement Control
- Enhanced prospects for Tandem MIG/MAG welding Optimisation of the process — Part 1
- Fatigue properties of resistance spot welded and MAG plug welded joints - a comparison study
- Fatigue properties of weld-bonded joints out of Dogal 600 DP – high strength rubber based adhesives compared to one epoxi based adhesive
- Fatigue testing of mechanical joints
- FE-modelling of fatigue strength of laser welds
- Frictions Stir Spot Welding (FSSW) of 6063 and 5754 Al-alloys
- Frictions Stir Spot Welding (FSSW) of C-Mn thin steel - A feasability study
- Friction Stir Welding (FSW) –En studie över möjligheter ochbegränsningar
- Friction Stir Welding (FSW) of overlap joints in aluminium
- Handling fatigue evaluations of start and stop regions of continuous welds in a FE-environment
- Image systems for arc welding - technical requirements
- Improved formability of laser welded tailored blanks in TRIP steels, C-Mn steels, stainless steels and aluminium alloys
- Improved properties for resistance spot welding applications
- Increased weldability and productivity using hybrid Friction Stir Welding
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 1
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 2
- Influence of microfissures in submerged arc welds in high alloyedaustenitic stainless steel
- Influence of microfissures in submerged arc welds in high alloyed stainless steel - Part II
- Influence of weld metal flowability on the welding result
- Investigation of possibility to use spectrometry for monitoring the plasma in gas shielded arc welding
- Investigation of weldability with new MIG/MAG processes
- Joining of dissimilar metals using MIG weld brazing and friction stir welding
- Joining of Thin Strips
- Lack of fusion (LOF) in inclined downhill MAG welding — a study of the phenomenon and practical recommendations in order to avoid LOF
- Lack of fusion in MIG/MAGwelding of pressure vessels - a process study
- Laser sources for welding and cutting applications
- Laser twin-spot technology in the welding of thin sheet C-Mn steel lap joints with thick zinc coating and uncoated butt joints
- Laser weldability and tailored blanks welding of DP carbon steels, TRIP steel and austenitic stainless steels
- Laser weldability of DP carbon steels, austenitic stainless steels and aluminium
- Magnetic Pulse Welding - A Literature Study
- MAG-welding of Zn-coated steel, a continued process study
- MAG-welding of Zn-coated steel, a process study
- MAG-welding of Zn-coated steel, a survey of problems and possibilities
- Mechanical joining with FDS
- Metaller – en kort sammanställning
- Methods for industrialjoining of aluminium(AA5052) to coated C-Mnsteel (Dogal 220 RP) and stainless steel (LDX 2101) — a feasibility study
- Methods to perform larger throat thicknesses in standing fillet position (PB) with high productivity - A pre-study
- MIG/MAG-brazing of thin steel sheets
- MIG/MAG brazing of zinc coated and stainless steel sheet
- Nd:YAG Laser-MIG/MAGhybrid welding. A process optimisation for coated C-Mn high strength steel, and a parameter investigation of C-Mn high strength steel, stainless steel and aluminium alloys
- New techniques to handle fatigue calculations of continuous welds in a FE-environments based on shell elements
- New variants of TIG processes for high productivity and improved penetration
- Nya applikationer för FSW i aluminium: tailored blanks och punktsvetsning
- On MAG-welding of Zn-coated steel: a project summary
- Optimal Joint Preparationfor Laser Hybrid andTandem MIG/MAG Welding
- Optimised MIG/MAG welding of 3-6mm sheet materials
- Optimization of Weld Nut Geometry by Simulation
- Plasma Welding and Brazing
- Possibilities with Advanced Control of the Resistance Spot Welding Process
- Possibilities with laser illuminated high speed filming( Only as powerpoint, movies on CD )
- Prediction of Durability of Adhesively Bonded Aluminium Joints for Automotive Applications – Final Report
- Process Optimisation ofResistance Spot Welding of UHS steels
- Properties of FSW-joints in different aluminium alloys
- Properties of MIG/MAG brazed joints in zinc coated steel sheets
- Punktsvetsning av höghållfastastål – en litteraturstudie
- Recent developments in laser welding & cutting, a literature review
- Resistance Nut Welding of High Strength Steel
- Resistance seam welding of UHSS
- Resistance spot welding of some EHS and UHS steels: Part 1, C-Mn steels
- Resistance spot welding of some EHS and UHS steels: Part 2, stainless steels and mixed materials
- Resistance spot welding of ultra high strength C-Mn and stainless steels
- Resistance spot welding of ultra high strength C-Mn and stainless steels — enclosures
- Self-piercing riveting and collar joining of polymers to metal sheet
- Single Sided Joining Methods — A Feasibility Study
- Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets
- Svets- och mekaniska fogar för multimaterial konstruktioner
- Tandem-MIG/MAG welding, experiences from the optimisation of the process
- Tandem wire MAG welding, a process study
- Tandem wire MAG welding of C-Mn steels
- The Influence of Welding Parameters on Weld Quality and Tensile Strength of Aluminium Alloys AA6063 and AA5052
- Utveckling av produktionsteknik för sammansättning av tunnväggiga strukturer – Slutrapport till Swerea
- Visual joins for automotive applications – Weld-brazing with CMT and Plasmatron of galvanized steel without spatter
-
Rapporter från CJS
- Pågående projekt
- Tidigare projekt
- Forskningsseminarier
- Konferenser
- Högskolor och institut
- Lämna ditt förslag
-
Fogningscentrum CJS
- Om oss
-
FoU
-
Fogningscentrum CJS
-
Rapporter från CJS
- A guideline to high power (>3 kW) laser welding of steel, stainless steel and aluminium 2000-064
- Aluminium joining for automotive applications
- Applikationer för laserbelyst höghastighetsfilmning
- Arc and laser brazing of steel sheets - a literature study
- Aspects on problems with lack of fusion in MIG/MAG welding
- A study on welding performance with Laser-MIG/MAG welding for aluminium, stainless steel, coated boron steel and mixed materials
- Cold MIG welding of duplex stainless steels
- Crash Testing - Measurement Control
- Enhanced prospects for Tandem MIG/MAG welding Optimisation of the process — Part 1
- Fatigue properties of resistance spot welded and MAG plug welded joints - a comparison study
- Fatigue properties of weld-bonded joints out of Dogal 600 DP – high strength rubber based adhesives compared to one epoxi based adhesive
- Fatigue testing of mechanical joints
- FE-modelling of fatigue strength of laser welds
- Frictions Stir Spot Welding (FSSW) of 6063 and 5754 Al-alloys
- Frictions Stir Spot Welding (FSSW) of C-Mn thin steel - A feasability study
- Friction Stir Welding (FSW) –En studie över möjligheter ochbegränsningar
- Friction Stir Welding (FSW) of overlap joints in aluminium
- Handling fatigue evaluations of start and stop regions of continuous welds in a FE-environment
- Image systems for arc welding - technical requirements
- Improved formability of laser welded tailored blanks in TRIP steels, C-Mn steels, stainless steels and aluminium alloys
- Improved properties for resistance spot welding applications
- Increased weldability and productivity using hybrid Friction Stir Welding
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 1
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 2
- Influence of microfissures in submerged arc welds in high alloyedaustenitic stainless steel
- Influence of microfissures in submerged arc welds in high alloyed stainless steel - Part II
- Influence of weld metal flowability on the welding result
- Investigation of possibility to use spectrometry for monitoring the plasma in gas shielded arc welding
- Investigation of weldability with new MIG/MAG processes
- Joining of dissimilar metals using MIG weld brazing and friction stir welding
- Joining of Thin Strips
- Lack of fusion (LOF) in inclined downhill MAG welding — a study of the phenomenon and practical recommendations in order to avoid LOF
- Lack of fusion in MIG/MAGwelding of pressure vessels - a process study
- Laser sources for welding and cutting applications
- Laser twin-spot technology in the welding of thin sheet C-Mn steel lap joints with thick zinc coating and uncoated butt joints
- Laser weldability and tailored blanks welding of DP carbon steels, TRIP steel and austenitic stainless steels
- Laser weldability of DP carbon steels, austenitic stainless steels and aluminium
- Magnetic Pulse Welding - A Literature Study
- MAG-welding of Zn-coated steel, a continued process study
- MAG-welding of Zn-coated steel, a process study
- MAG-welding of Zn-coated steel, a survey of problems and possibilities
- Mechanical joining with FDS
- Metaller – en kort sammanställning
- Methods for industrialjoining of aluminium(AA5052) to coated C-Mnsteel (Dogal 220 RP) and stainless steel (LDX 2101) — a feasibility study
- Methods to perform larger throat thicknesses in standing fillet position (PB) with high productivity - A pre-study
- MIG/MAG-brazing of thin steel sheets
- MIG/MAG brazing of zinc coated and stainless steel sheet
- Nd:YAG Laser-MIG/MAGhybrid welding. A process optimisation for coated C-Mn high strength steel, and a parameter investigation of C-Mn high strength steel, stainless steel and aluminium alloys
- New techniques to handle fatigue calculations of continuous welds in a FE-environments based on shell elements
- New variants of TIG processes for high productivity and improved penetration
- Nya applikationer för FSW i aluminium: tailored blanks och punktsvetsning
- On MAG-welding of Zn-coated steel: a project summary
- Optimal Joint Preparationfor Laser Hybrid andTandem MIG/MAG Welding
- Optimised MIG/MAG welding of 3-6mm sheet materials
- Optimization of Weld Nut Geometry by Simulation
- Plasma Welding and Brazing
- Possibilities with Advanced Control of the Resistance Spot Welding Process
- Possibilities with laser illuminated high speed filming( Only as powerpoint, movies on CD )
- Prediction of Durability of Adhesively Bonded Aluminium Joints for Automotive Applications – Final Report
- Process Optimisation ofResistance Spot Welding of UHS steels
- Properties of FSW-joints in different aluminium alloys
- Properties of MIG/MAG brazed joints in zinc coated steel sheets
- Punktsvetsning av höghållfastastål – en litteraturstudie
- Recent developments in laser welding & cutting, a literature review
- Resistance Nut Welding of High Strength Steel
- Resistance seam welding of UHSS
- Resistance spot welding of some EHS and UHS steels: Part 1, C-Mn steels
- Resistance spot welding of some EHS and UHS steels: Part 2, stainless steels and mixed materials
- Resistance spot welding of ultra high strength C-Mn and stainless steels
- Resistance spot welding of ultra high strength C-Mn and stainless steels — enclosures
- Self-piercing riveting and collar joining of polymers to metal sheet
- Single Sided Joining Methods — A Feasibility Study
- Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets
- Svets- och mekaniska fogar för multimaterial konstruktioner
- Tandem-MIG/MAG welding, experiences from the optimisation of the process
- Tandem wire MAG welding, a process study
- Tandem wire MAG welding of C-Mn steels
- The Influence of Welding Parameters on Weld Quality and Tensile Strength of Aluminium Alloys AA6063 and AA5052
- Utveckling av produktionsteknik för sammansättning av tunnväggiga strukturer – Slutrapport till Swerea
- Visual joins for automotive applications – Weld-brazing with CMT and Plasmatron of galvanized steel without spatter
-
Rapporter från CJS
- Pågående projekt
- Tidigare projekt
- Forskningsseminarier
- Konferenser
- Högskolor och institut
- Lämna ditt förslag
-
Fogningscentrum CJS
Prenumerera på sidan
- Start
- › FoU
- › Fogningscentrum CJS
- › Rapporter från CJS
- › Applikationer för laserbelyst höghastighetsfilmning
Applikationer för laserbelyst höghastighetsfilmning
Per Brännström, Joakim Hedegård
Abstract
Ett Swerea-stött projekt där möjligheterna att använda laserbelyst höghastighetsfilmning för olika processer och applikationer har utvärderats.
Bli medlem
Medlemskapet i Svetskommissionen säkrar dina möjligheter till ökad lönsamhet.
1. Kostnadsfri rådgivning
2. Information om standarder
3. Fogningstekniskt nätverk
4. Tidningen Svetsen
Börja här
Kontakta oss
Besöksadress:
Grev Turegatan 12A
Visa på kartan ›
Postadress:
Grev Turegatan 12 A
114 46 Stockholm
Telefon, växel:
08-120 304 00
E-post:
info@svets.se
Svetskommissionen Grev Turegatan 12 A, 114 46 Stockholm Tel: 08-120 304 00 E-post: info@svets.se
Cookieinformation:
Vi använder cookies för att förbättra din upplevelse på hemsidan.
Genom att fortsätta godkänner du vår användning av cookies.