Svetskommissionen är en teknisk branschorganisation för fogande industri. Vi jobbar med standardisering, forskning och utbildning. Svetskommissionens viktigaste uppgift är att verka för våra medlemmars intressen.
- Medlemslogin
- / Press
- / A-Ö
- / In English
- Start
- Kunskapsbanken
- Utbildning
- Kurser
- Medlem
- Aktiviteter
- FoU
-
Fogningscentrum CJS
-
Rapporter från CJS
- A guideline to high power (>3 kW) laser welding of steel, stainless steel and aluminium 2000-064
- Aluminium joining for automotive applications
- Applikationer för laserbelyst höghastighetsfilmning
- Arc and laser brazing of steel sheets - a literature study
- Aspects on problems with lack of fusion in MIG/MAG welding
- A study on welding performance with Laser-MIG/MAG welding for aluminium, stainless steel, coated boron steel and mixed materials
- Cold MIG welding of duplex stainless steels
- Crash Testing - Measurement Control
- Enhanced prospects for Tandem MIG/MAG welding Optimisation of the process — Part 1
- Fatigue properties of resistance spot welded and MAG plug welded joints - a comparison study
- Fatigue properties of weld-bonded joints out of Dogal 600 DP – high strength rubber based adhesives compared to one epoxi based adhesive
- Fatigue testing of mechanical joints
- FE-modelling of fatigue strength of laser welds
- Frictions Stir Spot Welding (FSSW) of 6063 and 5754 Al-alloys
- Frictions Stir Spot Welding (FSSW) of C-Mn thin steel - A feasability study
- Friction Stir Welding (FSW) –En studie över möjligheter ochbegränsningar
- Friction Stir Welding (FSW) of overlap joints in aluminium
- Handling fatigue evaluations of start and stop regions of continuous welds in a FE-environment
- Image systems for arc welding - technical requirements
- Improved formability of laser welded tailored blanks in TRIP steels, C-Mn steels, stainless steels and aluminium alloys
- Improved properties for resistance spot welding applications
- Increased weldability and productivity using hybrid Friction Stir Welding
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 1
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 2
- Influence of microfissures in submerged arc welds in high alloyedaustenitic stainless steel
- Influence of microfissures in submerged arc welds in high alloyed stainless steel - Part II
- Influence of weld metal flowability on the welding result
- Investigation of possibility to use spectrometry for monitoring the plasma in gas shielded arc welding
- Investigation of weldability with new MIG/MAG processes
- Joining of dissimilar metals using MIG weld brazing and friction stir welding
- Joining of Thin Strips
- Lack of fusion (LOF) in inclined downhill MAG welding — a study of the phenomenon and practical recommendations in order to avoid LOF
- Lack of fusion in MIG/MAGwelding of pressure vessels - a process study
- Laser sources for welding and cutting applications
- Laser twin-spot technology in the welding of thin sheet C-Mn steel lap joints with thick zinc coating and uncoated butt joints
- Laser weldability and tailored blanks welding of DP carbon steels, TRIP steel and austenitic stainless steels
- Laser weldability of DP carbon steels, austenitic stainless steels and aluminium
- Magnetic Pulse Welding - A Literature Study
- MAG-welding of Zn-coated steel, a continued process study
- MAG-welding of Zn-coated steel, a process study
- MAG-welding of Zn-coated steel, a survey of problems and possibilities
- Mechanical joining with FDS
- Metaller – en kort sammanställning
- Methods for industrialjoining of aluminium(AA5052) to coated C-Mnsteel (Dogal 220 RP) and stainless steel (LDX 2101) — a feasibility study
- Methods to perform larger throat thicknesses in standing fillet position (PB) with high productivity - A pre-study
- MIG/MAG-brazing of thin steel sheets
- MIG/MAG brazing of zinc coated and stainless steel sheet
- Nd:YAG Laser-MIG/MAGhybrid welding. A process optimisation for coated C-Mn high strength steel, and a parameter investigation of C-Mn high strength steel, stainless steel and aluminium alloys
- New techniques to handle fatigue calculations of continuous welds in a FE-environments based on shell elements
- New variants of TIG processes for high productivity and improved penetration
- Nya applikationer för FSW i aluminium: tailored blanks och punktsvetsning
- On MAG-welding of Zn-coated steel: a project summary
- Optimal Joint Preparationfor Laser Hybrid andTandem MIG/MAG Welding
- Optimised MIG/MAG welding of 3-6mm sheet materials
- Optimization of Weld Nut Geometry by Simulation
- Plasma Welding and Brazing
- Possibilities with Advanced Control of the Resistance Spot Welding Process
- Possibilities with laser illuminated high speed filming( Only as powerpoint, movies on CD )
- Prediction of Durability of Adhesively Bonded Aluminium Joints for Automotive Applications – Final Report
- Process Optimisation ofResistance Spot Welding of UHS steels
- Properties of FSW-joints in different aluminium alloys
- Properties of MIG/MAG brazed joints in zinc coated steel sheets
- Punktsvetsning av höghållfastastål – en litteraturstudie
- Recent developments in laser welding & cutting, a literature review
- Resistance Nut Welding of High Strength Steel
- Resistance seam welding of UHSS
- Resistance spot welding of some EHS and UHS steels: Part 1, C-Mn steels
- Resistance spot welding of some EHS and UHS steels: Part 2, stainless steels and mixed materials
- Resistance spot welding of ultra high strength C-Mn and stainless steels
- Resistance spot welding of ultra high strength C-Mn and stainless steels — enclosures
- Self-piercing riveting and collar joining of polymers to metal sheet
- Single Sided Joining Methods — A Feasibility Study
- Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets
- Svets- och mekaniska fogar för multimaterial konstruktioner
- Tandem-MIG/MAG welding, experiences from the optimisation of the process
- Tandem wire MAG welding, a process study
- Tandem wire MAG welding of C-Mn steels
- The Influence of Welding Parameters on Weld Quality and Tensile Strength of Aluminium Alloys AA6063 and AA5052
- Utveckling av produktionsteknik för sammansättning av tunnväggiga strukturer – Slutrapport till Swerea
- Visual joins for automotive applications – Weld-brazing with CMT and Plasmatron of galvanized steel without spatter
-
Rapporter från CJS
- Pågående projekt
- Tidigare projekt
- Forskningsseminarier
- Konferenser
- Högskolor och institut
- Lämna ditt förslag
-
Fogningscentrum CJS
- Om oss
-
FoU
-
Fogningscentrum CJS
-
Rapporter från CJS
- A guideline to high power (>3 kW) laser welding of steel, stainless steel and aluminium 2000-064
- Aluminium joining for automotive applications
- Applikationer för laserbelyst höghastighetsfilmning
- Arc and laser brazing of steel sheets - a literature study
- Aspects on problems with lack of fusion in MIG/MAG welding
- A study on welding performance with Laser-MIG/MAG welding for aluminium, stainless steel, coated boron steel and mixed materials
- Cold MIG welding of duplex stainless steels
- Crash Testing - Measurement Control
- Enhanced prospects for Tandem MIG/MAG welding Optimisation of the process — Part 1
- Fatigue properties of resistance spot welded and MAG plug welded joints - a comparison study
- Fatigue properties of weld-bonded joints out of Dogal 600 DP – high strength rubber based adhesives compared to one epoxi based adhesive
- Fatigue testing of mechanical joints
- FE-modelling of fatigue strength of laser welds
- Frictions Stir Spot Welding (FSSW) of 6063 and 5754 Al-alloys
- Frictions Stir Spot Welding (FSSW) of C-Mn thin steel - A feasability study
- Friction Stir Welding (FSW) –En studie över möjligheter ochbegränsningar
- Friction Stir Welding (FSW) of overlap joints in aluminium
- Handling fatigue evaluations of start and stop regions of continuous welds in a FE-environment
- Image systems for arc welding - technical requirements
- Improved formability of laser welded tailored blanks in TRIP steels, C-Mn steels, stainless steels and aluminium alloys
- Improved properties for resistance spot welding applications
- Increased weldability and productivity using hybrid Friction Stir Welding
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 1
- Increasing the ductility of RSW joints in UHS steel through parameter adjustments, part 2
- Influence of microfissures in submerged arc welds in high alloyedaustenitic stainless steel
- Influence of microfissures in submerged arc welds in high alloyed stainless steel - Part II
- Influence of weld metal flowability on the welding result
- Investigation of possibility to use spectrometry for monitoring the plasma in gas shielded arc welding
- Investigation of weldability with new MIG/MAG processes
- Joining of dissimilar metals using MIG weld brazing and friction stir welding
- Joining of Thin Strips
- Lack of fusion (LOF) in inclined downhill MAG welding — a study of the phenomenon and practical recommendations in order to avoid LOF
- Lack of fusion in MIG/MAGwelding of pressure vessels - a process study
- Laser sources for welding and cutting applications
- Laser twin-spot technology in the welding of thin sheet C-Mn steel lap joints with thick zinc coating and uncoated butt joints
- Laser weldability and tailored blanks welding of DP carbon steels, TRIP steel and austenitic stainless steels
- Laser weldability of DP carbon steels, austenitic stainless steels and aluminium
- Magnetic Pulse Welding - A Literature Study
- MAG-welding of Zn-coated steel, a continued process study
- MAG-welding of Zn-coated steel, a process study
- MAG-welding of Zn-coated steel, a survey of problems and possibilities
- Mechanical joining with FDS
- Metaller – en kort sammanställning
- Methods for industrialjoining of aluminium(AA5052) to coated C-Mnsteel (Dogal 220 RP) and stainless steel (LDX 2101) — a feasibility study
- Methods to perform larger throat thicknesses in standing fillet position (PB) with high productivity - A pre-study
- MIG/MAG-brazing of thin steel sheets
- MIG/MAG brazing of zinc coated and stainless steel sheet
- Nd:YAG Laser-MIG/MAGhybrid welding. A process optimisation for coated C-Mn high strength steel, and a parameter investigation of C-Mn high strength steel, stainless steel and aluminium alloys
- New techniques to handle fatigue calculations of continuous welds in a FE-environments based on shell elements
- New variants of TIG processes for high productivity and improved penetration
- Nya applikationer för FSW i aluminium: tailored blanks och punktsvetsning
- On MAG-welding of Zn-coated steel: a project summary
- Optimal Joint Preparationfor Laser Hybrid andTandem MIG/MAG Welding
- Optimised MIG/MAG welding of 3-6mm sheet materials
- Optimization of Weld Nut Geometry by Simulation
- Plasma Welding and Brazing
- Possibilities with Advanced Control of the Resistance Spot Welding Process
- Possibilities with laser illuminated high speed filming( Only as powerpoint, movies on CD )
- Prediction of Durability of Adhesively Bonded Aluminium Joints for Automotive Applications – Final Report
- Process Optimisation ofResistance Spot Welding of UHS steels
- Properties of FSW-joints in different aluminium alloys
- Properties of MIG/MAG brazed joints in zinc coated steel sheets
- Punktsvetsning av höghållfastastål – en litteraturstudie
- Recent developments in laser welding & cutting, a literature review
- Resistance Nut Welding of High Strength Steel
- Resistance seam welding of UHSS
- Resistance spot welding of some EHS and UHS steels: Part 1, C-Mn steels
- Resistance spot welding of some EHS and UHS steels: Part 2, stainless steels and mixed materials
- Resistance spot welding of ultra high strength C-Mn and stainless steels
- Resistance spot welding of ultra high strength C-Mn and stainless steels — enclosures
- Self-piercing riveting and collar joining of polymers to metal sheet
- Single Sided Joining Methods — A Feasibility Study
- Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets
- Svets- och mekaniska fogar för multimaterial konstruktioner
- Tandem-MIG/MAG welding, experiences from the optimisation of the process
- Tandem wire MAG welding, a process study
- Tandem wire MAG welding of C-Mn steels
- The Influence of Welding Parameters on Weld Quality and Tensile Strength of Aluminium Alloys AA6063 and AA5052
- Utveckling av produktionsteknik för sammansättning av tunnväggiga strukturer – Slutrapport till Swerea
- Visual joins for automotive applications – Weld-brazing with CMT and Plasmatron of galvanized steel without spatter
-
Rapporter från CJS
- Pågående projekt
- Tidigare projekt
- Forskningsseminarier
- Konferenser
- Högskolor och institut
- Lämna ditt förslag
-
Fogningscentrum CJS
Prenumerera på sidan
- Start
- › FoU
- › Fogningscentrum CJS
- › Rapporter från CJS
- › Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets
Stabilising effect of aluminium in filler wire for MAG welding of Zinc coated steel sheets
Johan Andersson, Joakim Hedegård
Abstract
Bli medlem
Medlemskapet i Svetskommissionen säkrar dina möjligheter till ökad lönsamhet.
1. Kostnadsfri rådgivning
2. Information om standarder
3. Fogningstekniskt nätverk
4. Tidningen Svetsen
Börja här
Kontakta oss
Besöksadress:
Grev Turegatan 12A
Visa på kartan ›
Postadress:
Grev Turegatan 12 A
114 46 Stockholm
Telefon, växel:
08-120 304 00
E-post:
info@svets.se
Svetskommissionen Grev Turegatan 12 A, 114 46 Stockholm Tel: 08-120 304 00 E-post: info@svets.se
Cookieinformation:
Vi använder cookies för att förbättra din upplevelse på hemsidan.
Genom att fortsätta godkänner du vår användning av cookies.